English
 |
| DIMENSIONS | 74”W x 60”D x 5”H Overall Height: adjustable between 24-1/2" - 42 -3/8" Frame Width: 5" |
| CORD | 5' silver cloth cord with (6) adjustable cable s (one in each corner, 2 in center of 71" length) |
| DIMMABLE | Yes |
| FINISH/COLOR | Powder coat metal frame and canopy, acrylic diffuser at top and bottom |
| INSTALLATION | Ceiling mounted |
| LAMPING | Gen2 Premium integral LED, 14W, 3000k, 95 CRI |
| SHADE FINISH | Powder coat aluminum |
| SWITCH | Remotely at wall (hardwired) |
1. Fixture to be of contract quality and suitable for commercial use.
2. All light fixtures must be U.L. approved and bear the U.L. label.
3. Voltage: 120 / 277. Contractor to verify with site conditions.
4. Fixture to be hardwired/installed by General Contractor.
5. All mounting hardware to be included with fixture.
6. Warning sticker on fixture to be placed on top of mounting plate above light tube.
7. All materials and methods of construction must comply with all local fire & life safety codes.
8. Refer to drawings for location.
9. Manufacturer to provide finish samples for approval prior to production.
10. Manufacturer to clearly mark each carton with item ID and specification number
| DIMENSIONS | 74”W x 60”D x 5”H Overall Height: adjustable between 24-1/2" - 42 -3/8" Frame Width: 5" |
| CORD | 5' silver cloth cord with (6) adjustable cable s (one in each corner, 2 in center of 71" length) |
| DIMMABLE | Yes |
| FINISH/COLOR | Powder coat metal frame and canopy, acrylic diffuser at top and bottom |
| INSTALLATION | Ceiling mounted |
| LAMPING | Gen2 Premium integral LED, 14W, 3000k, 95 CRI |
| SHADE FINISH | Powder coat aluminum |
| SWITCH | Remotely at wall (hardwired) |
1. Fixture to be of contract quality and suitable for commercial use.
2. All light fixtures must be U.L. approved and bear the U.L. label.
3. Voltage: 120 / 277. Contractor to verify with site conditions.
4. Fixture to be hardwired/installed by General Contractor.
5. All mounting hardware to be included with fixture.
6. Warning sticker on fixture to be placed on top of mounting plate above light tube.
7. All materials and methods of construction must comply with all local fire & life safety codes.
8. Refer to drawings for location.
9. Manufacturer to provide finish samples for approval prior to production.
10. Manufacturer to clearly mark each carton with item ID and specification number
