English
 |
DIMENSIONS: 70"W x 30"D x 49"H; Counter Height: 36"H
FINISH: Laminate cabinet with (2) drawers and (1) lockable drawer, (4) open shelves and (1) open roll-out shelf, wood veneer shroud and (1) laminate keyboard tray, 2cm quartz top, and brushed steel toekick
IMPORTANT: (1) Verify left-hand or right-hand prior to ordering. (2) If existing equipment is being used, verify sizing to ensure proper fit within shelving. Modifications are allowed on the staff facing side, if needed, to accommodate existing equipment sizes
1. Manufacturer to verify all necessary parts, hardware, and dimensions required for assembly.
2. All internal hardware (hinges, screws, bolts, etc.) shall be corrosion proof.
3. Major joints as needed shall utilize lap joints or double doweled construction with corner blocks. Glue and staples are used to reinforce the joinery. Metal fasteners should be used where appropriate to reinforce the joinery.
4. All wood to be kiln dried and treated to be insect and vermin free.
5. All fasteners, blocking and supports to be concealed.
6. All exposed surfaces to be fully finished and sealed for moisture resistance, unless otherwise noted.
7. Manufacturer to provide nylon carpet glides.
8. Show all pieces in shop drawings.
9. To be of contract quality and suitable for commercial use.
10. All materials and methods of construction must comply with local fire and life safety codes for use in hotels and other public spaces.
11. Manufacturer to provide finish samples for approval prior to production.
12. Refer to drawings for location.
13. Ensure that piece will fit in elevators and through doors prior to commencing fabrication.
14. Manufacturer to clearly mark each carton with item ID and specification number.
DIMENSIONS: 70"W x 30"D x 49"H; Counter Height: 36"H
FINISH: Laminate cabinet with (2) drawers and (1) lockable drawer, (4) open shelves and (1) open roll-out shelf, wood veneer shroud and (1) laminate keyboard tray, 2cm quartz top, and brushed steel toekick
IMPORTANT: (1) Verify left-hand or right-hand prior to ordering. (2) If existing equipment is being used, verify sizing to ensure proper fit within shelving. Modifications are allowed on the staff facing side, if needed, to accommodate existing equipment sizes
1. Manufacturer to verify all necessary parts, hardware, and dimensions required for assembly.
2. All internal hardware (hinges, screws, bolts, etc.) shall be corrosion proof.
3. Major joints as needed shall utilize lap joints or double doweled construction with corner blocks. Glue and staples are used to reinforce the joinery. Metal fasteners should be used where appropriate to reinforce the joinery.
4. All wood to be kiln dried and treated to be insect and vermin free.
5. All fasteners, blocking and supports to be concealed.
6. All exposed surfaces to be fully finished and sealed for moisture resistance, unless otherwise noted.
7. Manufacturer to provide nylon carpet glides.
8. Show all pieces in shop drawings.
9. To be of contract quality and suitable for commercial use.
10. All materials and methods of construction must comply with local fire and life safety codes for use in hotels and other public spaces.
11. Manufacturer to provide finish samples for approval prior to production.
12. Refer to drawings for location.
13. Ensure that piece will fit in elevators and through doors prior to commencing fabrication.
14. Manufacturer to clearly mark each carton with item ID and specification number.
