The process specification of Bathroom Cabinets is a technical document that stipulates reasonable processing technology and processing methods in production. In these documents, the process route of Bathroom Cabinets, the types of equipment and fixtures and molds used, the technical requirements and inspection methods of products, the technical level of workers and the working hour’s quota, the specifications and consumption quotas of materials used, etc. are stipulated. It is an important basis for organizing production and workers to operate, and it is also the design basis for new and expanded factories.

Here is the content list:

• Choose the right wood

• Make Bathroom Cabinets

• Paint and install

  
  

Choose the right wood

Observe the color and age of the wood with the naked eye. According to the production quantity of this batch of Bathroom Cabinets, select suitable materials for different parts of use. Generally, the surface parts with a neat appearance and beautiful and consistent color are used to make the surface of the cabinet body. There are some defects and Nodes that must be treated with a special process and used on the back of the cabinet or other inconspicuous parts; if deterioration, deformation or insects are found, discard them to ensure the consistency of the quality of Bathroom Cabinets.

Make Bathroom Cabinets

According to the professional production workbook, according to the specific mold, the required materials for different parts are cut into different sizes. Grind the cut wood to remove burrs, residual bark, and scratches on the surface. This procedure will be repeated many times during the production process. Use a variety of professional tools such as professional precision bench drills to pre-drill structural installation holes in wood. The second process is professionally designed to ensure that no installation holes can be seen on the surface of the installed Bathroom Cabinets. To make the side panels, door panels, bottom panels, and other parts of Bathroom Cabinets, it is necessary to go through the process of "putting together". Paneling is a process that pays attention to craftsmanship and manufacturing precision. First, the selected and polished wood of the same size is juxtaposed for defense Fortunately, for a specific mold, apply glue boards on the parts that need to be spliced, and then use professional fixtures to press and fix them from all sides and up and down at the same time, and keep them for more than 24 hours; Professional engineers calculate and slot according to the force-bearing area and expansion and contraction coefficients to prevent cabinet deformation in future use. Use a professional polishing machine to polish the assembled cabinet boards several times. After the previous processes, the wooden boards have already taken shape, but to become a part of Bathroom Cabinets, they still need to go through the "cutting" process. Go to the part that doesn't meet your needs.

Paint and install

Bathroom Cabinets use professional polyester paint to ensure that it is insect-proof and waterproof in terms of use requirements; unique and generous colors are a key to maintaining high-end in the market. It is divided into primer and topcoat, which need to be applied four times in total. The function of the primer is to seal the wood pores, fix the color, and remove small wood thorns; the topcoat can be applied after the primer is dry, and the final performance of the topcoat The color of the cabinet is also waterproof and insect-proof. It takes a long time to paint. For the sake of quality, the painting process cannot be simplified to shorten the production time. Therefore, the painting process of a set of Bathroom Cabinets takes more than 3 days. The paint workshop has strict operating procedures, especially the finish paint workshop. Because the top coat is assembled after drying, it is required that there should be no dust in the workshop. All workers in the finish paint workshop must wear masks. Assemble the paint-dried parts on a professional installation table, and check whether there are any problems with the size, installation, and paint of the Bathroom Cabinets. After the assembly is completed, wrap them in plastic wrap and pack them in boxes, and use large-sized wooden strips outside the cartons box fixed.

If you are interested in Bathroom Cabinets, you can contact us. Our website is www.hymanhospitality.com. Welcome and look forward to cooperating with you.